Toshiba 203sd DV change ???

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • CCS
    Trusted Tech

    Site Contributor
    250+ Posts
    • Feb 2008
    • 266

    #1

    Toshiba 203sd DV change ???

    On the 203s or 203sd, is the DV just pour and play ? Or does this model require a dv set-up stir and value setting ?
  • jamesyboy
    toner monkey

    100+ Posts
    • Jul 2010
    • 188

    #2
    here you go easy

    3.1 Adjustment of Auto-Toner Sensor
    When the developer material is replaced, adjust the auto-toner sensor in the following procedure.
    <Procedure> (Adjustment Mode (05-200))
    (1) Install the process unit into the equipment.
    Note:
    Do not install the toner cartridge.
    (2) While pressing [0] and [5] simultaneously, turn the power ON.
    The following message is displayed on a 7-segment LED.
    Fig. 3-1
    (3) Key in code [200] and press the [START] button.
    Fig. 3-3
    Note:
    Fig. 3-4
    (9) Turn the power OFF.
    (10) Install the toner cartridge.
    [

    Comment

    • ToshibaTech
      Senior Tech

      500+ Posts
      • Apr 2007
      • 580

      #3
      @james: This is a sharp made machine not the 203L you are probably thinking of...

      On a 203SD it's just "pour and play" as you stated. No adjustment it's hardwired.
      I will not give you service manuals or firmware.

      Comment

      • jamesyboy
        toner monkey

        100+ Posts
        • Jul 2010
        • 188

        #4
        oops! i stand corrected cheers sharp bok eek!!!!!

        Comment

        Working...