Service Manual Toshiba E-Studio 850

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dimpo
    Trusted Tech
    • Aug 2009
    • 104

    #1

    Service Manual Toshiba E-Studio 850

    Hi
    Am having a Toshiba eStudio 850 and the owner have forgoten the pin number.Is there any one who knows how to check for the pin-number for this copier machine?I am also looking for a service manual for this machine if there is someone with it you can e-mail it to nrsmoyo@yahoo.com
    Best Regards
    Dimpo
  • bojans
    Service Manager

    Site Contributor
    1,000+ Posts
    • Feb 2008
    • 1313

    #2
    If I understand you need to change department code. Enter User interface, or User settings Administrator password 123456, find Department settings and change it.

    If you have to change Administrator password 08-263.

    Comment

    • esam ramadan
      Trusted Tech
      • Feb 2008
      • 199

      #3
      also set 203 to 1 then it will work but without count

      Comment

      • Dimpo
        Trusted Tech
        • Aug 2009
        • 104

        #4
        Service/Technical Manual Toshiba e-studio 850

        Hi
        Thanks for the responce but now am stuck as to how i enter into simulation for this Toshiba E-Studio 850 Copier thus why am kindly asking for a service manual if someone can email it to nrsmoyo@yahoo.com
        Once again thanks for the responce and hope to hear from you soon for am stuck with this machine on my workbench.
        Best Regards
        Dimpo

        Comment

        • bojans
          Service Manager

          Site Contributor
          1,000+ Posts
          • Feb 2008
          • 1313

          #5
          Entering diagnostic, or setting mode 08.
          Hold 0+8 while powering machine, until you access setting mode.

          Comment

          • bojans
            Service Manager

            Site Contributor
            1,000+ Posts
            • Feb 2008
            • 1313

            #6
            Check your PM

            Comment

            Working...