I would hold off on the es6530C series, its replacement is due in the next few months and fixes reliability issues with the fuser drive unit. but yes copy quality and reliability would be the best i've seen if it wasnt for the fuser drive units. which is even worse for low volume machines, our high volume ones seem to run alot better.
as for the es2500c i now rate them fairly highly, sure at first the developers only lasted around 30k but now after fitting all the mods etc. we are getting above 100k out of them and fusers at 300k+
the copy quality is miles ahead of the es351c series, also alot easier to work on and maintain
as for kyoceras, well they are cheap... but as for copy quality they are no benchmark...
as for the es2500c i now rate them fairly highly, sure at first the developers only lasted around 30k but now after fitting all the mods etc. we are getting above 100k out of them and fusers at 300k+
the copy quality is miles ahead of the es351c series, also alot easier to work on and maintain
as for kyoceras, well they are cheap... but as for copy quality they are no benchmark...
Comment