Toshiba E-Studio 520 Update Failed,Reinstall Firmware.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tinnyjay
    Senior Tech

    500+ Posts
    • Oct 2009
    • 662

    #1

    Toshiba E-Studio 520 Update Failed,Reinstall Firmware.

    Hello
    One day Toshiba E-Studio 520 showed error code F070 and i changed the wire between LGC and SYS board but the problem is the same.
    After trying firmware update with USB drive,firmware installing started very good with HDD upgrade,but failed when upgrading Laser and Engine.
    Now when i turn the machine on,it says Firmware Failed,Please reinstall the firmware.
    I dont have another version of firmware and please i really need it (european model).
    my e-mail is : tinnyjay@hotmail.com

    I am ready to exchange all my stuff instead of that firmware.
    Please help me
    "Who loves the roses,must also bear thumbs"
  • michaelc
    Field Tech

    Site Contributor
    500+ Posts
    • Mar 2011
    • 590

    #2
    The hard drive is attached to they system board and that update fine. Your laser is attached to your logic board, both failed to upgrade. Did your scan logic and system board upgrade ok? What about the paper feed? Could possibly be the logic board failing for some reason.
    It didn't say that I couldn't do it in the manual.

    Comment

    • tinnyjay
      Senior Tech

      500+ Posts
      • Oct 2009
      • 662

      #3
      Originally posted by michaelc
      The hard drive is attached to they system board and that update fine. Your laser is attached to your logic board, both failed to upgrade. Did your scan logic and system board upgrade ok? What about the paper feed? Could possibly be the logic board failing for some reason.
      You're right,because Scanner is connected to SYS board and upgrade is ok.
      "Who loves the roses,must also bear thumbs"

      Comment

      • michaelc
        Field Tech

        Site Contributor
        500+ Posts
        • Mar 2011
        • 590

        #4
        glad i could help.
        It didn't say that I couldn't do it in the manual.

        Comment

        Working...