Todhiba e studi 520 FIRMWARE FAILED

[emujo]

I think he's a little gun shy now...we'll just have to wait until he breaks another machine...any bets on less then 6 weeks? Emujo

[copyalbania]

i have formatted in fat 32 and used 256 mb usb stick.

emujo you are very stupid by the way.

you just judge people i think you should help someone.....

[michaelc]

Did you use that usb stick to put the firmware on the machine ? Did you get firmware from else where or are you using the firmware which you used before?

[copyalbania]

yes of course
i have formatted firstly as the service manual says and than i made firmware.
first i made firmware to the machine only the LSR and engine firmware said error the hdd and the rest it succeed making firmware

[michaelc]

If the firmware worked for everything apart from the laser and engine. Then it could possibly be a faulty engine (logic) board.

[copyalbania]

Yes i thought so but when i tried three to four times noisy the machine does not boot, when i switch the machine the display stays off and only the scanner lamp stays on all the time

[michaelc]

The machine will not boot if the boards have different levels of firmware. I can only suggest trying a logic board, from all the information I have been told.

[JustManuals]

i have formatted in fat 32 and used 256 mb usb stick.

emujo you are very stupid by the way.

you just judge people i think you should help someone.....

Nobody cares what you think, you and that other idiot from Algeria.

You should call a quaiified technician to fix the problems you have (if that is possible) as it clearly shows from your posts that you are unqualified.

[jonezy999]

Thanks to Emujo's stupidity, I and many other contributors here have solved their problems.

[JustManuals]

Thanks to Emujo's stupidity, I and many other contributors here have solved their problems.

So there!

[5thsmiley]

Re: Todhiba e studi 520 FIRMWARE FAILED

Quite often with firmware updates they start from scratch. Install the firmware and the copier should reboot and the display should appear.


Sent from my iPhone using Tapatalk

[5thsmiley]

Re: Todhiba e studi 520 FIRMWARE FAILED

Another thing to consider is reinstalling the old firmware and install then updates in the proper order. Good luck.


Sent from my iPhone using Tapatalk