E studio 232 error F10

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • nabeel
    • Jun 2025
    #1

    [Error Code] E studio 232 error F10

    Hi,
    Toshiba e232 has error F10 what I know is HDD is failure.. what shall I do with the new HDD? Do I have to upload new firmware? if yes how to upload it? I already have firmware (cT377ALLE076USB) but I don't Know how to upload it!!! please help me
    Tags: 232, e232, error, f10, firmware, hdd, help, hytec, indigo, studio, upload, usb
    • Mr Spock
      Vulcan Inventor of Death

      1,000+ Posts
      • Aug 2006
      • 2064
      #2
      search this website. There are many post that will answer this question. Many I have posted.
      And Star Trek was just a tv show...yeah right!

        Comment

        • didi2005
          Trusted Tech

          250+ Posts
          • May 2011
          • 401
          #3
          1. Backup USer Data if can
          2. Replace new HDD
          3. Create partition, holding "3+CLEAR" and power ON machine, key in "3" and press "START".
          4. Format HDD. 08-690:2
          5. Update firmware: holding "4+9" and power ON machine. (*Plug in USB drive that contain firmware)
          6. Format HDD. 08-690:2.
          7. Initialize software, 08-947, press initialize button.

            Comment

            • michaelc
              Field Tech

              Site Contributor
              500+ Posts
              • Mar 2011
              • 590
              #4
              you could try to reformat and install new firmware but i think didi's post is the best option.
              It didn't say that I couldn't do it in the manual.

                Comment

                • emujo
                  Field Supervisor

                  2,500+ Posts
                  • Jun 2009
                  • 3009
                  #5
                  BTW...the 232 originally (US Model) had a 40 gig drive..Toshiba released f/w to accomidate the 80 gig. I don't have any info on the level you are installing or the regional area it is for, plus, the firmware version you posted looks a little bizzare. Today, you can't get less than a 160 gig drive and I'm not sure if it will work...HYTEC here in the US has 40gig drives for sale if you run into snag. And for "CopyAlbania"...I hope you see how the forum is supposed to work...notice the lack of "please someone send me XXX". Emujo
                  If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

                    Comment

                    • ivovb
                      Senior Tech

                      500+ Posts
                      • Apr 2008
                      • 695
                      #6
                      Originally posted by michaelc
                      you could try to reformat and install new firmware but i think didi's post is the best option.
                      Except that this is wrong procedure that is copy-pasted from SH. You can not format after partitioning! - Skip point 4.

                      BR
                      I'll never ask if I didn't check user manual, service manual, parts list, BSI/TNI/TAD... web, existing threads.

                        Comment

                        • JustManuals
                          Field Supervisor

                          5,000+ Posts
                          • Jan 2006
                          • 9838
                          #7
                          This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from
                          Just Manuals | The Internet's largest selection of manuals | Instant Downloads

                          Paul@justmanuals.com

                            Comment

                            Previous template Next
                            Working...