Doc feeders

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • vincent64
    Trusted Tech

    250+ Posts
    • Feb 2008
    • 382

    #1

    [Misc] Doc feeders

    Got a prob that is a bit different, ES 450 screen says to load origianls into the Doc Feeder.
    , this happens when you try to copy off the glass.
    I have checked and cleaned sensors, ran adjustments and all that fun stuff, the book says to do, but nothing works so far.
    Any ideas???
  • michaelc
    Field Tech

    Site Contributor
    500+ Posts
    • Mar 2011
    • 590

    #2
    Re: Doc feeders

    Usually means you need to lift the DF and drop it again to do a copy on the glass. As in last thing to be copied went through the DF. There is a micro switch at the back right corner which can cause a few issues. Other than that, I would be thinking the DF logic board if all the sensors were checked.
    It didn't say that I couldn't do it in the manual.

    Comment

    Working...