If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I was going to say "sure, all of us trained Toshiba techs know how to load and where to get firmware", but since the guy is fairly new I didn't want to be a Dic*. Thanks for stepping up to the plate Mr Spock. Emujo
If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.
I can load firmware for 352 and 600 but somehow the 350 I can't load new firmware, the machine always message " please set correct USB storage key anyones help please Thanks
I can load firmware for 352 and 600 but somehow the 350 I can't load new firmware, the machine always message " please set correct USB storage key anyones help please Thanks
If this is after the update then ignore it. If it is before then the firmware may be in the wrong location. I use the root of the drive to flash the ebridge 1 machine and the folder for ebridge 2 and 3. You may also have a bad firmware loaded.
I was going to say "sure, all of us trained Toshiba techs know how to load and where to get firmware", but since the guy is fairly new I didn't want to be a Dic*. Thanks for stepping up to the plate Mr Spock. Emujo
I was just answering the question....
He did not ask HOW!!
I can load firmware for 352 and 600 but somehow the 350 I can't load new firmware, the machine always message " please set correct USB storage key anyones help please Thanks
The 352 and 600 are ebridge 2 MFPs, 350 is ebridge 1, try a smaller (less than 1Gig) USB drive, ensure it's formatted FAT. 2 and 3 series work with up o 2 gig drives. Emujo
If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.
Comment