Network Config e-studio 182

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • gutillo
    • Jun 2025
    #1

    [Misc] Network Config e-studio 182

    Hi. I try ti set IP, mask and default gateway in a Toshiba e-studio 182, but every time I check, the values I set are gone, replaced by others set by the machine. How can i config the network settings and fix them in this machine?

    Thanks
    Tags: default, e-studio, network, set, settings, studio, time, toshiba, work
    • sdrawkcab
      Confused & Bewildered

      250+ Posts
      • Jun 2009
      • 317
      #2
      Re: Network Config e-studio 182

      By default the copier is set to dynamic, so set to static, set the IP, Subnet and GW, THEN, go back a screen and press Complete, then the copier will re initialise.
      Some days, it's just not worth chewing through the restraints

        Comment

        • Travis06
          Tech.

          100+ Posts
          • Feb 2008
          • 193
          #3
          Re: Network Config e-studio 182

          Like the post above said, make sure you hit complete after you set it. Got me before.

            Comment

            • SalesServiceGuy
              Field Supervisor

              Site Contributor
              5,000+ Posts
              • Dec 2009
              • 8142
              #4
              Re: Network Config e-studio 182

              This procedure gets most people the first time.

                Comment

                • gutillo
                  #5
                  Re: Network Config e-studio 182

                  Thanks a lot! It worked perfectly.

                    Comment

                    Previous template Next
                    Working...