What is the serial port used for on the e-studio 35?

[Guest]

Can it be used for printing by connecting to a computer?

Can someone please shed some light on this?

Thanks

Peter

[wagon]

Unlikely, although I am no Toshiba authority. Most likely it is there for upgrading firmware and such.

[Mr Spock]

For connecting a mouse to it. This is for when you need to access the controller directly.

[yannisp]

Thanks for the replies guys but some advice needed...

Which controller might that be for the serial port? This machine has no additional cards installed that are obvious.

I'm in a middle of a dilema though.

I have purchased two e-studios (one for me and one for my friend)
- One is an e-studio 25 with the 1031 controller installed and fax and also has a sorter installed.
- The other is the e-studio 35 with a finisher but no controllers, fax etc

The dilema is:
I really like the e-studio 35 because of the touch screen as it seems more user friendly.
But the e-studio 25 is decked out and can print either over the network or as a stand alone unit, has fax so logic tells me to keep this.

In you opinion, which is the better unit to keep at the end of the day?

If I could get a 1010 card for the 35 for a reasonable price (to print over the network)I would choose it in a second but it seems very difficult to get a hold of.

Both have done about 400K copies.

What do you guys think?

Thanks

Peter

For connecting a mouse to it. This is for when you need to access the controller directly.

[nhatthuc0000]

You must buy some things

think i that you need oder some thinks.
1.GA 1040 card if i want use LPT port
2.LPT or RJ45 connect cable
or
1. GL 1010 controller
2. HHD installed os included scan
3.RJ45 connect cable
i think That will cost you another 200 $ to hit the mark
good luck

[yannisp]

Whis is the cheapest option to be able to print over the network on the...

e-studio 35?

Which is the cheapest option the 1040 or the 1010? (not interested in fax but do like the scan option though either to e-mail or network)

I finally got a hold of the gl-1010 hardware service manual and had a good look at it.

Essentially a computer box with the bridge board to interface with the e-studio 35 and the CPU card that hooks up to the bridge board.

Initial thought was to just get a computer and hook it up to the e-35 to do the job but the bridge board stuffs things up.

If there was a way to connect the computer to the e-35 without the bridge board this can be done as cheap as anything and with infinite expandability.

Is the 1040 setup the same as the 1010 or is it just a stand alone card that plugs into the e-35?

I'm trying to get as much knowledge as possible about the expandability options on the e-35 to be able to choose which photocopier is the better value at the end of the day (plain e-35 with nice user interface or decked out e-25)

By the way, I'm also located in Australia

Thanks

Peter

think i that you need oder some thinks.
1.GA 1040 card if i want use LPT port
2.LPT or RJ45 connect cable
or
1. GL 1010 controller
2. HHD installed os included scan
3.RJ45 connect cable
i think That will cost you another 200 $ to hit the mark
good luck

[MUMMIM]

how do i send to you

gl-1010 can scan
ga-1040 can't scan

I had some gl 1010, fax card, and ga104
0 it is secondhand of goods and runing very good. I live in Vietnam, how many gl1010 do you interested?

Descriptions
HDD : 40-80GB
SDram : 128MB
the OS version can print and scan.

price
gl1010 is 120USD
ga1040 is 90USD
gd 1090-1080 is 60USD
FOB vietnam

e-studio 35?

Which is the cheapest option the 1040 or the 1010? (not interested in fax but do like the scan option though either to e-mail or network)

I finally got a hold of the gl-1010 hardware service manual and had a good look at it.

Essentially a computer box with the bridge board to interface with the e-studio 35 and the CPU card that hooks up to the bridge board.

Initial thought was to just get a computer and hook it up to the e-35 to do the job but the bridge board stuffs things up.

If there was a way to connect the computer to the e-35 without the bridge board this can be done as cheap as anything and with infinite expandability.

Is the 1040 setup the same as the 1010 or is it just a stand alone card that plugs into the e-35?

I'm trying to get as much knowledge as possible about the expandability options on the e-35 to be able to choose which photocopier is the better value at the end of the day (plain e-35 with nice user interface or decked out e-25)

By the way, I'm also located in Australia

Thanks

Peter

[yannisp]

MUMMIM, PM has been sent to you

I'm interested in the 1040 for now.

Thanks

Peter

gl-1010 can scan
ga-1040 can't scan

I had some gl 1010, fax card, and ga104
0 it is secondhand of goods and runing very good. I live in Vietnam, how many gl1010 do you interested?

Descriptions
HDD : 40-80GB
SDram : 128MB
the OS version can print and scan.

price
gl1010 is 120USD
ga1040 is 90USD
gd 1090-1080 is 60USD
FOB vietnam

[MUMMIM]

how many?

How many GA-1040 would you like?

mail to me : trieuphongvnn@gmail.com

thanks
regards

I'm interested in the 1040 for now.

Thanks

Peter

[tech1224]

that is for connecting a laptop to the machine when using FSMS. to udate firemware, set 08 & 05 codes. But it cannot be printed to. (And I have never heard of connecting a mouse to that. for the controler)