Toshiba 3510c - Diagonal banding on cyan only

[sambo]

Re: Toshiba 3510c - Diagonal banding on cyan only

While I await by developer, is there a way to turn off the pattern test so I can just print in b/w.
Thanks.

[jonezy999]

Re: Toshiba 3510c - Diagonal banding on cyan only

While I await by developer, is there a way to turn off the pattern test so I can just print in b/w.
Thanks.

You can disable IQC by changing these codes, needless to say turn them back after you replace that developer.

(08)556 default is 1, change to 0
(08)557 default is 1 change to 0
)08)4546 default is 5 change to 0

[sambo]

Re: Toshiba 3510c - Diagonal banding on cyan only

You can disable IQC by changing these codes, needless to say turn them back after you replace that developer.

(08)556 default is 1, change to 0
(08)557 default is 1 change to 0
)08)4546 default is 5 change to 0

Sweet!

It's working a treat. Thanks mate.

[sambo]

Re: Toshiba 3510c - Diagonal banding on cyan only

Just to finalise this thread, yes it was the developer as most of you suggested.

Replacing the developer rectified the problem.

Thanks again.