Toshiba E-Studio 550 GL1020 Controller Issues

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • emujo
    Field Supervisor

    2,500+ Posts
    • Jun 2009
    • 3009

    #31
    Re: Toshiba E-Studio 650 GL1020 Controller Issues

    Originally posted by joebit
    Hi Guys,
    Ive read the post and note that there are some users on this forum trying to make money from it. Not that helpful!!

    I'm in the same position as a lot of other subscribers to this thread. Need the recovery software for the GL-1020 scan and print controller to format a new drive for a estudio 650.
    If anybody can help me it would be appreciated.
    Regards
    Joe
    Why would you think that the help you need should be free? Try this, find a Toshiba dealer in your area and ask them to sell you the genuine CDs for the GL....and if you can't do the reload yourself, get a toshiba tech involved for 150 an hour...but you would begrudge some one from charging you $30-35 for spending their time to download, burn and ship said items ( along with instructions that might make more sense the Japlish) to you....yeah, it may be a little unethical (possibly illegal) but if a trained tech wants to take a chance at assisting you and might get fired (very very slim chance) over it, maybe you should say "thanks for your assistance, here's the pittance you asked for". Gotta love it, 1st post and he wants something for free and trying to shame our techs...Emujo
    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

    Comment

    • mandat169tk

      #32
      Re: Toshiba E-Studio 550 GL1020 Controller Issues

      Down them !

      http://fyi.toshiba.com:81/KB/file_uploads/4771/gl10x0.html

      Comment

      • viokaze09

        #33
        Re: Toshiba E-Studio 550 GL1020 Controller Issues

        can anybody help me. I bought the 550. I was told the software was wipe out.
        how can I get the software?

        Comment

        Working...