Toshiba e 520 saddle finisher

[SOS]

Hello friends,
does anyones know how to turn on saddle finisher mj-1028, when i plug sorter in, it won't let me select saddle finisher
thanks

[sdrawkcab]

Re: Toshiba e 520 saddle finisher

Have you fitted the IPC board?

[Mr Spock]

Re: Toshiba e 520 saddle finisher

make sure it is the correct ipc pwb. There is a setting (around 08-1912 check the service handbook) that may need to be changed for the finisher type.

[SOS]

Re: Toshiba e 520 saddle finisher

Thank you
i will check machine

[SOS]

Re: Toshiba e 520 saddle finisher

Hello mr. spock,
I checked service handbook, there is no 08-1912

[michaelc]

Re: Toshiba e 520 saddle finisher

Is there a small board (IPC Board) fitted to the logic board with a 1 connector in it ? When you say you can not select the saddle stitch option, is it shaded out? Do the other finisher functions work?

[SOS]

Re: Toshiba e 520 saddle finisher

yes, all function work, except saddle stich shaded out, can't select
thanks

[emujo]

Re: Toshiba e 520 saddle finisher

If the option is there, but greyed out, you must have something configured that is preventing the saddle stitcher from working...It could be the wrong size paper or orientation. It can only stitch 8x11R and 11x17. There is a matrix in the user guide that shows what can be used together, but it may help just to factory default the MFP. Emujo

[michaelc]

Re: Toshiba e 520 saddle finisher

If the option is there, but greyed out, you must have something configured that is preventing the saddle stitcher from working...It could be the wrong size paper or orientation. It can only stitch 8x11R and 11x17. There is a matrix in the user guide that shows what can be used together, but it may help just to factory default the MFP. Emujo

At least we have got to the stage where we know the finisher itself is working.

Just to add to what emujo has said. Do you have staples in the saddle stitch part of the finisher, takes separate staples.