el RADF (MR-3021) NO TRABAJA C550 l ERROR. solucion SOS, PLIS.
-
-
Re: COPIER toshiba studio 305 ERROR CODEr C550
Check if the harness connecting the RADF board and SLG board is disconnected or open
circuited.
(2) Check if the conductor pattern on the RADF board is short circuited or open circuited.
(3) Check if the conductor pattern on the SLG board is short circuited or open circuited.
(4) Replace the RADF board.
(5) Replace the SLG board
"Broken again" -
Re: COPIER toshiba studio 305 ERROR CODEr C550
You have a communication error between the DF and scanner board (slg).
Go to 0-8 enter 905 to see if the slg bd shows the firmware version. If not try reloading the firmware to the slg. If that doesn't work change the slg bd. Also check the voltage supply to the Df board (just in case)
Like Sugar4 stated if a problem between your Df and Slg boards
Comment
Comment