Toshiba e studio 353 sram error does it initalize?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • SOS
    Technician
    • Oct 2011
    • 46

    #1

    Toshiba e studio 353 sram error does it initalize?

    I have Toshiba e 353, after replaced HD and install new firmware, machine show sram error does it initialize? when I try 08 service mode, won't let me go to 947
    anyone help please
    Thanks
  • jim v
    Technician
    • May 2008
    • 41

    #2
    Re: Toshiba e studio 353 sram error does it initalize?

    Originally posted by SOS
    I have Toshiba e 353, after replaced HD and install new firmware, machine show sram error does it initialize? when I try 08 service mode, won't let me go to 947
    anyone help please
    Thanks
    Did you do a 3/clear 3 and 3/clear 2 prior to updating the firmware?

    Comment

    • dariel89
      Technician
      • May 2014
      • 18

      #3
      Re: Toshiba e studio 353 sram error does it initalize?

      There is a jumper (blue) next to the battery. remove it for 15 min (with the machine off) After 15 min. replace it go into 0-8 service when ask to initialize sram do it should fix the problem

      Comment

      • SOS
        Technician
        • Oct 2011
        • 46

        #4
        Re: Toshiba e studio 353 sram error does it initalize?

        I tried 3/clear 3 and 3/ clear 2 and also remove jumper after 15 min, still no luck, won't let me initialize sram

        Comment

        • dariel89
          Technician
          • May 2014
          • 18

          #5
          Re: Toshiba e studio 353 sram error does it initalize?

          Check the battery voltage (seen dead batteries cause this problem) If bat is ok check the Nvram on Sys bd. Remove it from socket check for any opened traces under it.

          Comment

          • SOS
            Technician
            • Oct 2011
            • 46

            #6
            Re: Toshiba e studio 353 sram error does it initalize?

            battery voltage is .134 is that normal?

            Comment

            • SOS
              Technician
              • Oct 2011
              • 46

              #7
              Re: Toshiba e studio 353 sram error does it initalize?

              I replace new battery 3.2 vol, still same problem

              Comment

              • dariel89
                Technician
                • May 2014
                • 18

                #8
                Re: Toshiba e studio 353 sram error does it initalize?

                The battery was dead. Is supposed to be above 3.0 V. After replacing bat do same thing again with the jumper but before format and partition hdd again . Install firmware to Sys board and hdd.
                This time after installing firmware turn machine off and remove jumper again for 15 min. Replace jumper back and go to 0-8 mode and see what happens.

                Comment

                • SOS
                  Technician
                  • Oct 2011
                  • 46

                  #9
                  Re: Toshiba e studio 353 sram error does it initalize?

                  Hello dariel,
                  I have no luck, I replaced bat and new firmware same error, what else can I do?

                  Comment

                  Working...