not Monday ... MacGuyver day

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 22997
    #1

    not Monday ... MacGuyver day

    e Studio 2540C registration motor:
    This one requires a little explanation. The motor's shock mount split. When I got back to the office, I measured the shock mount: original (broken)= 6mm, more recent= 10mm

    registration motor 2540C 1.JPGregistration motor 2540C.JPG


    e Studio 4520C lift motor:

    lift motor gear pack.JPG


    Fun times. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=
    Tags: None
    • mckinley
      Chief Twiddler

      100+ Posts
      • Dec 2006
      • 150
      #2
      Re: not Monday ... MacGuyver day

      Regsitration motor had to replace just the odd few
      Happiness Is The Road.

        Comment

        • fixthecopier
          ALIEN OVERLORD

          2,500+ Posts
          • Apr 2008
          • 4714
          #3
          Re: not Monday ... MacGuyver day

          A good tech can pull a rabbit out of his hat. Was replacing the transfer section on a Ricoh a few weeks ago. I ordered the new revised part, didn't get the new metal bracket to hold it in. I took my wire snips and cut one out of the plastic from the old unit. Far as I know, it still works.
          The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking

            Comment

            Previous template Next
            Working...