[CQ] Toshiba Estudio 455 Scanning to PC in Color CQ issue

[Doug James]

I just installed this machine used and not real familiar with scanning on these machines yet. But attached is the scan I get when scanning to PC.
How can I adjust this or find the info how to. Have all the manuals but can't seem to pinpoint where to start... Thanks so much for any help !!

[Sperman]

Re: Toshiba Estudio 455 Scanning to PC in Color CQ issue

I just installed this machine used and not real familiar with scanning on these machines yet. But attached is the scan I get when scanning to PC.
How can I adjust this or find the info how to. Have all the manuals but can't seem to pinpoint where to start... Thanks so much for any help !!

Looks like the adf needs to be re set up using the pegs that are attached to the rear bracket. Loosen all screws inset pegs close adf tighten up again.
This will square the feeder up and if you download the install instructions for this adf you will find all the info you need to move lead edge and top edge margins and to further adjust skew.
Hope this helps.
Steve

[Doug James]

Re: Toshiba Estudio 455 Scanning to PC in Color CQ issue

Looks like the adf needs to be re set up using the pegs that are attached to the rear bracket. Loosen all screws inset pegs close adf tighten up again.
This will square the feeder up and if you download the install instructions for this adf you will find all the info you need to move lead edge and top edge margins and to further adjust skew.
Hope this helps.
Steve

Too cool, Thanks so much. I bet your right... Thanks Again !!