es355 front door part #

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • blackdog
    Trusted Tech

    100+ Posts
    • Jun 2012
    • 211

    #1

    es355 front door part #

    Hey does anyone have the part # for front door retro-fit spring clip to keep the door closed.
    This door issue was on a tabs a few years back. I did use that Part # but PR tells me its invalid.
    If someone has come up with a good fix for this issue please pass it along.
    Happy Holidays!
  • blackcat4866
    Master Of The Obvious

    Site Contributor
    10,000+ Posts
    • Jul 2007
    • 23009

    #2
    Re: es355 front door part #

    Our company just orders whole doors. They don't appear to be modified in any way.

    I can look for the bulletin, or get you the whole door part number ... tomorrow. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

    Comment

    • blackdog
      Trusted Tech

      100+ Posts
      • Jun 2012
      • 211

      #3
      Re: es355 front door part #

      Originally posted by blackcat4866
      Our company just orders whole doors. They don't appear to be modified in any way.

      I can look for the bulletin, or get you the whole door part number ... tomorrow. =^..^=
      Thanks, I beleive the door itself has not changed form, the inner panel has a plastic helper installed on models produced after 2010. Hence the retro-fit prior to 2010. I have boxes in the field with this retro-fit installed.
      So I would have thought this part would still be available.

      Comment

      • blackdog
        Trusted Tech

        100+ Posts
        • Jun 2012
        • 211

        #4
        Re: es355 front door part #

        OK Blackcat I guess you're referring to left cover which would have been redesigned.
        Looks like that will be my best bet now.

        BTW TSB-1045 is the bulletin.

        Thanks again.

        Comment

        Working...