If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
6LE09610000 THMS-HTR-U-390 ( Upper )
4406379760 THMS-HTR-L-300 ( Lower )
6LA07172000 THRMST-340-FUS ( there are 2 of these in the fuser )
they are the pt numbers for UK machines anyway, but i guess they may be the same elsewhere.
i would check a few things though before fitting them, such as the connector on the rear of the fuser tray / connector on rear frame for any damage or small fragments of paper, also make sure all the door switches are operating incase the machine thinks it's still ready with a door open, if this happens & the customer slides out the fuser / trans. belt unit, it will break the fuser connection while it thinks it's ready & throw a fuser error.
Comment