169 results in 0.0407 seconds.
-
5002i incoming fax tray switching..
Tray 1 and 2 both normal Letter ... incoming faxes over the weekend uses all tray 1 paper.. and doesnt ATS to tray 2... (but does ATS for a copy or print... -
Deteremine M20i Supply Stats?
Is there a way to determine the toner or drum status on a M20i before the machne says it's time to replace? -
konica1015.1216.1120.1212
good day.I need to adjust the APS (automatic paper selection settings) and the ATS (automatic tray selection settings).and i don't know how to do it,... -
BH421 c-3803
Have a bh421 with C-3803 errors.
Done so far:
Rebuilt fuser including fuser sensor assembly and new heaters.
... -
-
Konica 7130 pm
7130 changed DV, drum & blade. Cleared maint., drum & DV counts. Timers & all. Couldn't figure it out so I turned it on & let it go through... -
Kon 7130 ATS/DV adj
Hey everybody. Kon 7130. Changed dru, blade & SV. Cleared counts. Set date. No how ti do ATS/ATDC adjustment. Haven't done 1 since the merge. Appreciate... -
konica1015.1216.1120.1212
hello,those konica1015.1216.1120.1212 are given me problems with the by pass tray at times it picks at times it dose not,and i have check all the wheels... -
mx 6201
hello out there
A colleague has an ongoing problem with a mx 6201.
code H4-04 is displayed, firmware up to date and thermistors... -
Savin 4035 Problems
When first called to this copier it was for a copy quality issue which entailed a general cleaning and adding toner to resolve the issue. I had to return... -
Bizhub 200 error C3452
OK, first off, I am not familiar with Minolta, don't even know enough to be dangerous. Have a Bizhub 200 giving a C3452 error. Checked both heat lamps... -
e2330c "Adjustment step is not correct. Readjust from Gamma-Adjustment (2)"
Anybody see this problem before? I can't run ATS adjustment. I can't run gamma adjustments in 05. Can't do 05-396 or 4719. This message appears when... -
ricoh 1060 sc541 everyday
this comes up every morning. when i check fusing temp display BOTH thermistors read "0". hence the reason the code comes up.lamps are lighting.... -
Ricoh 1035/2035/3045
I have been having problems with SC-542 - SC-546 codes. What happens is I replace the fuser unit with a rebuilt unit and usually a SC-542 code comes up.... -
Sc.533 on Mpc2500
Hot roller overheating temperature. So far I checked OK with thermistors, lamps, whole fuser connection. What else could be problem ? Copier had about...
