Xerox wc 5765

[bluebear]

Re: Xerox wc 5765

Hi Mukasa,

I have the same problem on WC5765 after alboot machine is asking for fuser incompatible, can you please send me the nvm file to try and how you fixed your fault please?

Thank you

[Krunal]

Re: Xerox wc 5735

I am having xerox wc 5735 in DC mode. How to change it to MFD mode. I am unable to change NVM value of 03-004 to change it to MFD. Firmware upgrade didn't solved it. Network controller is not found and unable to open network setting to track the ip address and connect it to pc. Kindly guide.

Thanx.

[Krunal]

Re: Xerox wc 5765

can u send me pws for 5735 - 5790. thnx.

[seximibabay07]

Re: Xerox wc 5765

Hi all,
I have the same problem on WC5645 message error, Xerografic and fuser incompatible, sameone can send me the nvm file or the steps to fix it????
Alves

[seximibabay07]

Re: Xerox wc 5765

Hi all,
I have the same problem on WC5645 message error, Xerografic and fuser incompatible, sameone can send me the nvm file or the steps to fix it????
Alves

yes i do! i have pws and edoc, but the error message dont give a right way to fix.

[Mukasa]

Re: Xerox wc 5765

Guy , i restored NVM for 5735-5790 on customer machine and the machine has changed the machine speed ID to 33 and the machine is asking for the change of fuser and xerographic modules.
when i try to change the speed back to 65 its asking for xerox passcode which i need someone to help me with to close this call.
Mukasa

Hello my friend check the machine covers it must have the passcode. if not you must look for a xerox 5765 which has a passcode and down load its NVM and upload it to your machine please. it will again ask you for the a passcode which you will have . passcodes are not interchanged.

good luck

[ktxerox]

Re: Xerox wc 5765

HI,
Can you please confirm on which cover we can found the code i have tried but did not found.


Reg,
Kt

[sina_vel]

Re: Xerox wc 5765

check your pm

can u send nvm passcode for me?

sina.amelasl@gmail.com

thx

[hassanabdalrahim]

Re: Xerox wc 5765

i want the PWS NVM Save & Restore tool and how to load a new nvm to my copier

[Krunal]

Re: Xerox wc 5765

kindly send me PWS for xerox wc 57xx. krunal_shah787@yahoo.com
Thanks.

[Zahid khan]

Re: Xerox wc 5765

Guy , i restored NVM for 5735-5790 on customer machine and the machine has changed the machine speed ID to 33 and the machine is asking for the change of fuser and xerographic modules.
when i try to change the speed back to 65 its asking for xerox passcode which i need someone to help me with to close this call.
Mukasa

. Please send me the nvm restore and method .any help would be appreciated thanks.

[Zahid khan]

Re: Xerox wc 5765

Guy , i restored NVM for 5735-5790 on customer machine and the machine has changed the machine speed ID to 33 and the machine is asking for the change of fuser and xerographic modules.
when i try to change the speed back to 65 its asking for xerox passcode which i need someone to help me with to close this call.
Mukasa

Please send me the nvm restore Xerox 5765. My photocopier shows installation procedure incomplete.my pm is zahidpak90@gmail.com .thanks

[Zahid khan]

Re: Xerox wc 5765

check your pm

I need nvm for 5765 . Zahidpak90@gmail.com

[Zahid khan]

Re: Xerox wc 5765

Hi Every one,
Thanks for your support i managed to fix the machine its now working.
Mukasa

I have removed battery from Xerox 5765 but after installing battery Xerox would not start .it only shows green screen.

[Guest]

Re: Xerox wc 5765

Please send me the nvm restore Xerox 5765.
my pm yimsangiam@hotmail.com
thanks