700 Imaging error

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • mickey singh
    replied
    Re: 700 Imaging error

    Is it only on heavyweight? Might be paper touching the belt on the trail edge, if so there are nvms to reduce the buckle

    Leave a comment:


  • InterfaceP
    started a topic 700 Imaging error

    700 Imaging error

    I have a 700 DCP that when I print solids on 13x19 the trailing edge of the sheet the image isn't being transferred. Its like the 2nd BTR is disengaging to soon.

    Is there a procedure that I cant find or a NVM value I can change?

    Thanks as always for your help.
Working...