[CQ] xerox 7225 CQ

[Mukasa]

I did CQ calibration print and copy, were all succesfull ok,
the prints are fine but photocopies have funy backgrounds, some times red when using Glass and green when using Dadf.
please assist.

[JrTech]

Re: xerox 7225 CQ

That would be your Single Board Controller PWB. Part number 604K84742

Hope that helps

[djwhoo]

Re: xerox 7225 CQ

I did CQ calibration print and copy, were all succesfull ok,
the prints are fine but photocopies have funy backgrounds, some times red when using Glass and green when using Dadf.
please assist.

maybe the dadf height adjustment? is light coming through? all prints are fine? what about black and white copies?

[Mukasa]

Re: xerox 7225 CQ

maybe the dadf height adjustment? is light coming through? all prints are fine? what about black and white copies?

Hi ,
The black and white copies both on the glass or Dadf have a black background.
Generaly all photocopying is not good.