xerox wc 5755

[ChiChaK]

Re: xerox wc 5755

Just repalce the developer module and developer material.
Follow service manual procedure for replacement and it will do all the calibration you need:-

1. Select dC131 location 09-271 developer age and reset to zero.
2. Perform the dC905 TC Sensor Calibration.
3. Perform ADJ 9.2 Image Quality Adjustment Routine.
4. If a new developer assembly is installed, reset the Developer count to zero in the HFSI feature screen. Refer to GP 17 High Frequency service Items.

wait... take a look logic..

if is a problem with that developer station ist to be lighter copy? as I said, this is just to drum!