xerox wc45 Light pattern spots on copys

[Guest]

Please I need help to diagnose what the problem is. I have cleaned the corotron, the drum looks ok. just replaced the fuser, ozone filter, toner cartridge and waste bottle 3 weeks ago. (sorry for my bad English)
img033.jpg

[exCSER]

Re: xerox wc45 Light pattern spots on copys

That looks like high moisture content in the paper. Try other paper that has been wrapped in its ream wrapper.

[djacidito]

Re: xerox wc45 Light pattern spots on copys

That looks like high moisture content in the paper. Try other paper that has been wrapped in its ream wrapper.

Thanks. I followed your instructions, changed 3 different brands of wrapped paper but the problem continues.

[Phil B.]

Re: xerox wc45 Light pattern spots on copys

[QUOTE=djacidito;574725]Please I need help to diagnose what the problem is. I have cleaned the corotron, the drum looks ok. just replaced the fuser, ozone filter, toner cartridge and waste bottle 3 weeks ago. (sorry for my bad English)

QUOTE]

looks like a transfer issue.. did you do a half page stop test? how is the image on the drum?

not sure if this machine has a transfer belt or not...check that or the transfer roller for spots

[djacidito]

Re: xerox wc45 Light pattern spots on copys

looks like a transfer issue.. did you do a half page stop test? how is the image on the drum?

not sure if this machine has a transfer belt or not...check that or the transfer roller for spots

Thank you. I followed your instructions. Transfer roller seems ok, toner looks well distributed. The image on the drum looks like the one printed, light spots of toner in the same places.

[Phil B.]

Re: xerox wc45 Light pattern spots on copys

Thank you. I followed your instructions. Transfer roller seems ok, toner looks well distributed. The image on the drum looks like the one printed, light spots of toner in the same places.

so either the developer or the charge is not getting an even layer....

[Phil B.]

Re: xerox wc45 Light pattern spots on copys

did you make sure the laser glass is clean?

[adriansto]

Re: xerox wc45 Light pattern spots on copys

Please I need help to diagnose what the problem is. I have cleaned the corotron, the drum looks ok. just replaced the fuser, ozone filter, toner cartridge and waste bottle 3 weeks ago. (sorry for my bad English)
[ATTACH=CONFIG]37423[/ATTACH]

You need to change developer material.

[shaahin]

Re: xerox wc45 Light pattern spots on copys

Hi
The Developer is low. add developer to fix this problem.
The weight of developer and housing is about 4350 g.

[chubblies]

Re: xerox wc45 Light pattern spots on copys

Check the HV contacts, as it has dumped developer somewhere. Look up "barber pole" on searchlite