Xerox 250 color misalignment HELP

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • djwhoo
    Trusted Tech

    100+ Posts
    • Aug 2013
    • 117

    #1

    Xerox 250 color misalignment HELP

    I replaced both ros and the mob sensor. I get all 0 on the one registration setup and ng on another. I forgot which one. Cyan is way off and yellow is also D46F6F37-2147-4573-8DA3-824462AF1153.jpgi swapped the drums but it had no effect
  • Detonation
    Trusted Tech

    Site Contributor
    250+ Posts
    • Feb 2010
    • 392

    #2
    Re: Xerox 250 color misalignment HELP

    If MOB sensor replacement did not work I'd look at MCU PWB.

    Comment

    • SeniorTch
      Trusted Tech

      Site Contributor
      100+ Posts
      • Jun 2017
      • 116

      #3

      Comment

      Working...