Detonation
Detonation
Trusted Tech
Last Activity: 9 hours ago
Joined: 02-23-2010
Location:
-
I do have the EX J75, but I think it's different from the EX C75. Maybe someone can confirm? -
Are you looking for the EX75 or bustled controller?Leave a comment:
-
I don't have the service manual for the D95 at hand, but normally all permanent NVM are stored in three locations. In the case of the AltaLink, this was...Leave a comment:
-
Caffeine's explanation is correct. However, it is possible to clone another D95, but it is tedious and not ideal. Your brand new D95 will get the serial...Leave a comment:
-
What NVM did he change? Normally this error is related to ITB motor, not software if I'm not mistaken.Leave a comment:
-
No service manual at hand, but normally there should be a battery on the ESS. Should be easily accessible.Leave a comment:
-
The factory reset can be accessed through diagnostic tools. Hold home button for 7 seconds, release, enter 6789 as code, choose Device and scroll down...Leave a comment:
-
admin / 1111
but if someone changed it and it is not known to what, you must do a factory reset.Leave a comment:
-
100% with Caffeine on this. Aftermarket toner is very much hit and miss and the more complicated the machine is, the worse the results are. Good places...Leave a comment:
-
I'd try to re-install software first.Leave a comment:
-
Yeah like Adrian said. The drums for the DC250 haven't been produced for a while now. If they've had a long shelf life in sub-optimal conditions they...Leave a comment:
-
Detonation replied to SOS Xerox WorkCentre 7830: Trapped in Authentication Hell - Need Your Expert Wisdom!in XeroxYes, absolutely. Just replace the toner chips. Beware that all toners will show up at 100% though, while they are not all full. So for example your cyan...Leave a comment:
-
Detonation replied to weird cyan yellow magenta pattern FX Docucentre v C5575 / altalink C8055 / WC 7955in XeroxI would take out the ITB assy and take off the ITB to see how the BUR and 1st BTR's are looking.Leave a comment:
-
Not in my service manual. But would guess it's fuser related. Does fuser get hot?Leave a comment:
-
Detonation replied to SOS Xerox WorkCentre 7830: Trapped in Authentication Hell - Need Your Expert Wisdom!in XeroxHi Laurent, you will be fine. You need different toners, or replace the chips in your current toner. Not sure where you are located but for Europe part...Leave a comment:
No activity results to display
Leave a comment: