Error 6-624 on diagnostic

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • danielkhaw
    Technician
    • Nov 2017
    • 22

    #1

    Error 6-624 on diagnostic

    Xerox 5000 have error id 6-624 when run regicon setup, anyone can help?
  • xtrain
    Trusted Tech
    • Dec 2012
    • 233

    #2
    Re: Error 6-624 on diagnostic

    Originally posted by danielkhaw
    Xerox 5000 have error id 6-624 when run regicon setup, anyone can help?
    Rap says MOB sensor dirty/defective, or laser problem, yellow/black.

    Comment

    • danielkhaw
      Technician
      • Nov 2017
      • 22

      #3
      Re: Error 6-624 on diagnostic

      Originally posted by xtrain
      Rap says MOB sensor dirty/defective, or laser problem, yellow/black.
      And how about 6-649? And also 6-643


      Sent from my iPhone using Tapatalk

      Comment

      • xtrain
        Trusted Tech
        • Dec 2012
        • 233

        #4
        Re: Error 6-624 on diagnostic

        6-624/643/649 all point to the inboard MOB (MARK ON BELT) sensor fail. Rap says exchange it with center mob sensor to see if fault changes to center mob. Part # of all 3 mob sensors is 130K70440.

        Comment

        • danielkhaw
          Technician
          • Nov 2017
          • 22

          #5
          Error 6-624 on diagnostic

          Originally posted by xtrain
          6-624/643/649 all point to the inboard MOB (MARK ON BELT) sensor fail. Rap says exchange it with center mob sensor to see if fault changes to center mob. Part # of all 3 mob sensors is 130K70440.
          Problem solve by shaking the 4 ROS cable attach to MCU pwb, thanks for saving my days , btw looking to purchase of the cable and the C/K ROS, did anyone sell this part?


          Sent from my iPhone using Tapatalk

          Comment

          Working...