Fiery X12 / Command WorkStation CWS

[mkeane]

Hi,

How do I get into the NT OS to access the Command WorkStation CWS ?

I have a screen attached to the Fiery but when I boot up and it goes through testing, config etc it just has a blue / blank screen on the VGA screen.

Thanks in advance.
Mark.

[mkeane]

Re: Fiery X12 / Command WorkStation CWS


See attached where I'm at...FieryX12_Loading.jpgFieryX12_Idle.jpg

[big mike]

Re: Fiery X12 / Command WorkStation CWS

I have a DCCS50 and the EX fiery for sale, cheap. Plus lots of supplies for this product.

[mkeane]

Re: Fiery X12 / Command WorkStation CWS

I have a DCCS50 and the EX fiery for sale, cheap. Plus lots of supplies for this product.

PM me with the details

[mkeane]

Re: Fiery X12 / Command WorkStation CWS

OK, this is where I'm at now....

- restored Fiery X12
- "network controller error" on DocuColor 12
- installed CWS v5 on Win XP (XP mode on Win 7) and can connect to Fiery X12
- have 1-56cts patch to hopefully fix "network controller error"
- PS printer install using EX12 WinXp print driver
- sent PS file to printer (import into CWS and print) but have error - see below
- test page from PS printer not printing - see below

Am I wasting my time or can I get this working ? What am I'm missing ??

FieryPSPrinter.JPGFieryXPMode.JPG