xerox dc242 problem with transparency

[Enzo]

Hello friends. I have a printing problem with xerox dc242. see the attached file. I have a problem with transparency. transparency is almost invisible on the file, while in print it is very clear. the same file, on other machines also xerox I do not have this problem. How can I solve it? I did the calibration but I did not solve it

file print.jpg

[xcopytech]

Re: xerox dc242 problem with transparency

In max setup you can adjust colors.

[adriansto]

Re: xerox dc242 problem with transparency

Hello friends. I have a printing problem with xerox dc242. see the attached file. I have a problem with transparency. transparency is almost invisible on the file, while in print it is very clear. the same file, on other machines also xerox I do not have this problem. How can I solve it? I did the calibration but I did not solve it

[ATTACH=CONFIG]39201[/ATTACH]

Transfer problem.
You need to play with 2nd btr curent transfer.

[Enzo]

Re: xerox dc242 problem with transparency

I tried to do the max setup and to change the 2nd btr. the problem is still there. the quality of the color has improved but that problem is still there. can I change some specific settings? maybe using a patch to correct the watermark?

[xcopytech]

Re: xerox dc242 problem with transparency

What did you adjust in max setup?

[Enzo]

Re: xerox dc242 problem with transparency

"atc sensor" and "auto gradation". other commands I do not know in the details

[xcopytech]

Re: xerox dc242 problem with transparency

Atc sensor need to be adjusted only if you replace developer housing.
Perform max setup adjustment from service manual and you will be able to get proper print quality.
Adj 9.1 to 9.5

[Iowatech]

Re: xerox dc242 problem with transparency

Hello friends. I have a printing problem with xerox dc242. see the attached file. I have a problem with transparency. transparency is almost invisible on the file, while in print it is very clear. the same file, on other machines also xerox I do not have this problem. How can I solve it? I did the calibration but I did not solve it

[ATTACH=CONFIG]39201[/ATTACH]

This might be the stupidest thing ever, but what type of transparency are you using? Some transparencies are not fit to be used in this application, and they will cause issues like this.
Sorry if this was a waste of time.

[Enzo]

Re: xerox dc242 problem with transparency

Atc sensor need to be adjusted only if you replace developer housing.
Perform max setup adjustment from service manual and you will be able to get proper print quality.
Adj 9.1 to 9.5

Which setting should I check?

[Enzo]

Re: xerox dc242 problem with transparency

This might be the stupidest thing ever, but what type of transparency are you using? Some transparencies are not fit to be used in this application, and they will cause issues like this.
Sorry if this was a waste of time.

Maybe I wrote the title badly. I have problems with images like watermark. When I set some images like the one in the picture in my first post, they are much more visible in print. On other machines, the same file is printed correctly.

[Enzo]

Re: xerox dc242 problem with transparency

Hello friends. I always have this problem on xerox dc242. as you can see from the attached image, the print has panels behind each image. why? It is not the first time that such a thing happens to me. thank you

[xcopytech]

Re: xerox dc242 problem with transparency

Corel or pdf file?
Bustled or standalone fiery?
Installed all patches from efi site?

[Enzo]

Re: xerox dc242 problem with transparency

Corel or pdf file?
Bustled or standalone fiery?
Installed all patches from efi site?

Well!
1- pdf file
2- fiery exp260
3- patch installed: 1-SI2JK 1-U8E58 1-Z4E66