can any body tell me how can i use my xerox pro555.when we switched on copier it shows printing and network controller is not availaible.pls tell me about this issue also send me service book.my id is etc_new@hotmal.com
-
-
you have to reload system software for network controller.
you need xerox pws and altboot software for dc 535 to do that.
maybe you will have to replace hdd too. -
i had open cpu cables from copier but problem remains same pls help meComment
-
post which error code you have
if you just disconnect cable machine will still search network controller.
you have to change some NVM values, so machine will become a copier.
but think that you have some other problem, enter in diagnostic mode and see in fault history which fault code you have.
or call some xerox tech
brComment
Comment