Strange issue: 08-100 code, paper jams before fuser or just into it. Reg & exit sensors ok, supposedly a new fuser w/new exit flag. Copy compressed in the direction of paper travel with no smudging, which means main mot is driving slower. Sometimes image is slightly expanded. Reduction and enlargement vary, even on the same page. Please see pic of severe compression in the first 1/3 of the copy. Guessing monitor wire from main mot giving mama board wrong speed info(?). I have not replaced the mot assembly or the board, and did not reinitialize NVM. Anybody know of any high resistive grounds that may cause this? Possible problem with high voltage somewhere?
Hoping someone has seen this so as to save a ton of time. TIA
Hoping someone has seen this so as to save a ton of time. TIA