Phaser 8500 error

[fixthecopier]

I mistakenly posted this as an error on a 860 but looked today and found it to be a 8500. The code is 09.038.46.5646
The machine goes through all of the test and then codes, then when you reboot , it will code right away. Thanks in advance for any help.

[JustManuals]

This pertains to the Black cartridge. Ink count sensor flags are stuck after melting.
The 5646 number is the page count.

HtH
Paul@justmanuals.com

[JustManuals]

This pertains to the Black cartridge. Ink count sensor flags are stuck after melting.
The 5646 number is the page count.

HtH
Paul@justmanuals.com

[fixthecopier]

Thanks for the quick response. Is this something that can be repaired with ease, or are there parts involved. It is for a public school and if I can pull it off , It will probably be a freebie, they seem to be broke. I do not mind taking it apart to clean something, but it is only the fourth phaser I have done in 9 years and to make matters worse, someone stole my case with the torx bits in it last week.

[JustManuals]

Send me your email, I'll send you a free copy of the manual.

Paul@justmanuals.com