Does anyone know the NVM code to reset the fuser on Xerox ApeosPort-IV 7080?
Error code 010-906
Attempted to reset HFSI, but did not go back to 0.
Error code 010-906
Attempted to reset HFSI, but did not go back to 0.
-
-
Re: Xerox ApeosPort-IV 7080 Fuser Replacement
Need a new fusing unit because fuse blown when reach its life or web detected end of life. -
Re: Xerox ApeosPort-IV 7080 Fuser Replacement
The NVM code didn't reset the fuser unit, you must reset the blown fuse and rotating the fuser web on the other way round. Too much work and poor print quality after the repair. So unless it's something emergency, better replace itComment
Comment