Versalink C405 causing ghosted images after 15-20 pages

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sbtiti
    Technician

    50+ Posts
    • Apr 2013
    • 62
    #1

    Versalink C405 causing ghosted images after 15-20 pages

    I have replaced the fuser on this MFP but it has not solved the issue with ghosting after about 15 to 20 printed pages. I think the fuser roller temperature is not staying constant which makes this an intermittent issue. Does anyone have an idea of where I should go from here? After producing pages with ghosting issues it will print a few more good quality ones before it starts the ghosting over again.
    Thank you, in advance, for any ideas.
    Tags: c405, fuser, ghosting, issue, pages
    • BaconSteve
      Trusted Tech

      100+ Posts
      • Apr 2019
      • 140
      #2
      Versalink C405 causing ghosted images after 15-20 pages

      How far apart is the ghost and the original? Pretty sure the 405 has a defect spacing printout that might help narrow it down. Could definitely be a drum cartridge as well. OEM or aftermarket supplies?

      Edit: Also, did you replace the BTR that came in the fuser kit?

        Comment

        • Phil B.
          Field Supervisor

          10,000+ Posts
          • Jul 2016
          • 22808
          #3
          Re: Versalink C405 causing ghosted images after 15-20 pages

          Originally posted by BaconSteve
          How far apart is the ghost and the original? Pretty sure the 405 has a defect spacing printout that might help narrow it down. Could definitely be a drum cartridge as well. OEM or aftermarket supplies? Edit: Also, did you replace the BTR that came in the fuser kit?
          Steve, It would appear as many times as this user has posted/commented, he should know the basics.. maybe just a brain fart...

          Fusers are only a part of a 'ghosting' problem...

          yes we need the spacing of the original mage vs the 'ghost image' and yes could be drum, BTR,fuser .. the defect ruler or MM spacing would help us greatly!

          Good Call!

            Comment

            • BaconSteve
              Trusted Tech

              100+ Posts
              • Apr 2019
              • 140
              #4
              Re: Versalink C405 causing ghosted images after 15-20 pages

              Originally posted by Phil B.
              Steve, It would appear as many times as this user has posted/commented, he should know the basics.. maybe just a brain fart...

              Fusers are only a part of a 'ghosting' problem...

              yes we need the spacing of the original mage vs the 'ghost image' and yes could be drum, BTR,fuser .. the defect ruler or MM spacing would help us greatly!

              Good Call!

                Comment

                • Phil B.
                  Field Supervisor

                  10,000+ Posts
                  • Jul 2016
                  • 22808
                  #5
                  Re: Versalink C405 causing ghosted images after 15-20 pages

                  Yup that's why I sometimes end comment with:
                  PhilB " The Dentist "
                  Seems quite evident, newbies come in .. post right away without seatching this plethora of info we have here, nor do they read forum rules or have any savvy of the way it is done.
                  GIMME GIMME GIMME. [emoji21][emoji29]



                  Sent from my SM-G960U using Tapatalk

                    Comment

                    • BaconSteve
                      Trusted Tech

                      100+ Posts
                      • Apr 2019
                      • 140
                      #6
                      Re: Versalink C405 causing ghosted images after 15-20 pages

                      Dr. Phil, lol [emoji23]

                        Comment

                        • sbtiti
                          Technician

                          50+ Posts
                          • Apr 2013
                          • 62
                          #7
                          Re: Versalink C405 causing ghosted images after 15-20 pages

                          Thanks for the help, but I have already determined that the ghosting is caused at the fuser... the fuser roller has picked up toner from the paper and relaid it back down. The fuser must not be staying up to temperature, but no errors are thrown. Since this happens intermittently, I was hoping someone out there had experienced it before and could say what they found. It's not a high capacity unit, so I doubt many have had the opportunity to work on one, but thank you for your efforts. Your constructive thoughts and ideas are always greatly appreciated!

                            Comment

                            • Phil B.
                              Field Supervisor

                              10,000+ Posts
                              • Jul 2016
                              • 22808
                              #8
                              Re: Versalink C405 causing ghosted images after 15-20 pages

                              Originally posted by sbtiti
                              Thanks for the help, but I have already determined that the ghosting is caused at the fuser... the fuser roller has picked up toner from the paper and relaid it back down. The fuser must not be staying up to temperature, but no errors are thrown. Since this happens intermittently, I was hoping someone out there had experienced it before and could say what they found. It's not a high capacity unit, so I doubt many have had the opportunity to work on one, but thank you for your efforts. Your constructive thoughts and ideas are always greatly appreciated!
                              The service manual should have steps for boosting fuser temp (also slows feed of paper..allowing for better bonding of toner to page)

                              generic toner/supplies can also be the culprit in these cases.

                                Comment

                                • sbtiti
                                  Technician

                                  50+ Posts
                                  • Apr 2013
                                  • 62
                                  #9
                                  Re: Versalink C405 causing ghosted images after 15-20 pages

                                  Thank you. I'll give that a try.

                                    Comment

                                    Previous template Next
                                    Working...