DCC 250 convert to DCC 450

[ck1]

can can the speed for this type machine ??

[TechMate]

can can the speed for this type machine ??

You can't convert. its a design specific to the model

[bruce fatbear]

yes it can be done by changing the ascii codes,cheers

[ck1]

yes it can be done by changing the ascii codes,cheers

can you guide me how to do it and PM me thanks

[bruce fatbear]

come by West Port,and buy me dinner and bring your copier,cheers

[ck1]

He he, dinner no problem but i from johor must take MC to you place ? anywhere did you selling spare parts ?

[bruce fatbear]

g'day,mate you can send your DCC250 for speed upgrade to 450 and for dcc320 meter reset to zero counter.you be saving on transportation.Southern malaysia to West port is RM300.00 and Rm300 return.if you come by own transportation,from Tuas,Singapore is about 360km.A 4.5 hour journey at a constant averaging 90 km/h.Highway toll charges about RM50.00 per trip.No a high price in Malaysia.Buy my parts in singapore.Cheers

[wlloh08]

Really can be converted dcc250 to dcc450? How it can be done? can it be share?

g'day,mate you can send your DCC250 for speed upgrade to 450 and for dcc320 meter reset to zero counter.you be saving on transportation.Southern malaysia to West port is RM300.00 and Rm300 return.if you come by own transportation,from Tuas,Singapore is about 360km.A 4.5 hour journey at a constant averaging 90 km/h.Highway toll charges about RM50.00 per trip.No a high price in Malaysia.Buy my parts in singapore.Cheers

Really can be converted to dcc450? How it can be done? can it be share? Are you a supplier to supply all the used copier. I'm interested dealing with xerox used copier in Document Center Family

[johnner66]

by changing the mcu n ess kit together

[copytech200X]

by changing the mcu n ess kit together

yes..i do same thing at dcc240 upgrade to dcc400.how do their chg meter counter to zero?

[wlloh08]

yes, i do agree by changing the ess and mcu can reset the meter, how about the series number? It will be same for those machine has reset the meter? As i know the serial number is password protected? I'm more keen in speed conversion, as some of the member say by changing the ascii code, but how? it also block by special administration password?

[copytech200X]

when u replaced MCU and ESS pwb at the same time ,removed existing meter counter(8 pin IC) to another pwb.then meter reading still remains same after u chg new pwb.

[wlloh08]

ok, to remain the same meter reading can be done by using the xerox diagnostic tools. Is this can changing the serial number also?