Addition of Affected Machine(MN-CONT v61.04)
Version up
...
22 results in 0.0227 seconds.
-
-
ECR-4640 Clerk log-off, how?
Hello Readers,
I received a ECR-4640 which I now prepare for use. I als find the user manual on the Internet.
But I encounter two,... -
priport dx-4640 pd
getting extended print only when scanning on the glass or df. internal prints ok. any bulletins on this one. don't want to fool with the ccd unless... -
ricoh dx 4640
internal prints are ok but when i use the scanner on the glass or through the adf the image gets extended. there is like a double image with a mono machine... -
Di450 edh-3 pulls 2 sheets or more sometimes
Does anyone know which parts need to be replaced to fix this? -
Taskalfa 250ci/utax CDC 1725 status page and ver 11 firmware.
As usual we've been doing the latest firmware with the suggested changes in simulation mode 147, 464 etc. Not all the time but on a couple of machines... -
Vertical grey/black lines in background Taskalfa 250 Ci
We have a CI 250 with vertical grey/black lines on the background. I have done sim 464/412/410, drum en developer cleaning and Registration en Calibration.... -
Random pix taken by the delivery guy lol
Cleaning out the warehouse..
Recycled..
Epic Fail..
... -
US and England tie
What say you, fellow techs on the Isle. At least a little respect now. -
u-send without firewall off
Is the any way to us for use u-send without off windows firewall. Or is the any port for that -
Ir 3300 paper jam
In IR 3300 machine shows paper jam at 2nd tray while switching on the machine but there is no paper at that point. some times it works fine. i tried with... -
iR 105+ with error code E744-4000
Have iR 105+ with error code E744-4000 which not listed in service manual.
Parts have changed HDD and Boot Rom but still appear the same... -
chip toner of sagem9445
i have a device for reset the chip toner oh sharp but i have a machines sagem mf9445 the same of sharp ar-m450 its chip dont read or write in my device... -
Scanning click Charge
Do any of you dealers charge for a scanning click?
If not, do any of you dealers ever think about it.
Do you think it would discourage clients?...
