[Error Code] Versant 2100 error 077-339

[mercadoven]

HI,

I have a Xerox versant 2100 with error 077-339, error description says, lower cooling belt walking to outer side, and It does, if I take out the assembly and center the belt it works for a while then error comes back.

Does anybody has info about what could be cusing this or any tip about what to look for.


best regards.

[fugglefeet]

Re: Versant 2100 error 077-339

HI,

I have a Xerox versant 2100 with error 077-339, error description says, lower cooling belt walking to outer side, and It does, if I take out the assembly and center the belt it works for a while then error comes back.

Does anybody has info about what could be cusing this or any tip about what to look for.


best regards.

Hi,

A colleague of mine had the same problem and it resulted in the board receiving the signal from the belt edge sensor having to be replaced. Check if the sensor on the upper cooling belt is identical to that of the lower cooling belt and swap out to test. If the belt still walks out, then have a look at the board as the suspect.

Hope this helps.

fugglefeet

[mercadoven]

Re: Versant 2100 error 077-339

Hi,

A colleague of mine had the same problem and it resulted in the board receiving the signal from the belt edge sensor having to be replaced. Check if the sensor on the upper cooling belt is identical to that of the lower cooling belt and swap out to test. If the belt still walks out, then have a look at the board as the suspect.

Hope this helps.

fugglefeet

Thanks a lot, I'll check the upper sensor, swap and test, and let know.

[fatfingers73]

Re: Versant 2100 error 077-339

Hello,

My colleagues having the exact same issue on a 2100. Do you remember what the fix was?

He's on holiday now for 2 weeks so I'll have to pop back there.

Thanks

Thanks a lot, I'll check the upper sensor, swap and test, and let know.