Hello all, what sort of image defect is this in the attached picture? Also, attached is a picture of whole bunch of dry toner that was in the front of the xerographic drawer.
-
-
Re: Image Defect
I'm no Xerox guy, but I'd venture to say that's developer, and that you don't have very much left.
It would probably be helpful to know what model Xerox this is. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^= -
Re: Image Defect
what model is it
looks pre historicComment
-
Re: Image Defect
That was my guess too. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: Image Defect
That looks like the inside of an old Docutech or something. Also looks like the Dev has leaked out everywhere and hence you have no developer to create the image.
Sent from my LYA-L09 using TapatalkComment
-
Re: Image Defect
Sorry everybody, forgot to put what what model - Xerox Nuvera 100 EA. During the Xerographic Check in Diagnostics, it is failing at the "BTAC Charge & Developer Checkout" part. All the Charge Corotron tests are passing.
I agree, it looks like the developer has leaked out.Comment
Comment