Altalink 7545

[big mike]

I replaced the fuser on a 7545. What's the difference between the slower fusers and the faster (7545/55) ones? Can I swap out the chip/board on them.to make them work?

[jburt]

The WorkCentre 7545/7556 uses the same fuser as the 7845/7855/7856, and is still available from Xerox 604K62212 is the part number

[big mike]

Thanks for responding. I understand that the WorkCentre® 7525, 7530, 7535, 7830, 7835 fuser is one part number. The WC-7545, 7556, 7845, 7855 is a different part number. Is the only difference the pwb/chip? Can I swap them to get it to work?