Hello technicians versant 2100
Does anyone know what causes the charge rollers to form a 1 to 2 cm band of toner ; Shortly after the drums are installed, this layer of toner also forms on the drums and the cleaning blade cannot clean them. Before placing the drum cartridge I do a general cleaning of the xerography without positive results, after a short time or few impressions the problem appears.
If anyone has had the problem please share the solution.
Thanking you for your valuable help always.
20210612_090838.jpg20210610_172301.jpg20210610_172254.jpg
Does anyone know what causes the charge rollers to form a 1 to 2 cm band of toner ; Shortly after the drums are installed, this layer of toner also forms on the drums and the cleaning blade cannot clean them. Before placing the drum cartridge I do a general cleaning of the xerography without positive results, after a short time or few impressions the problem appears.
If anyone has had the problem please share the solution.
Thanking you for your valuable help always.
20210612_090838.jpg20210610_172301.jpg20210610_172254.jpg