C75 error code 042 325

[positiveg]

Our printer has been down for a year then we got it back up and have now been getting the Error 042-325

Tech not sure I've seen the yellow drum

but we've replaced that drum several times and still getting the same error

would it be the main motor drive

oh and another thing the tech found that the motor for the waste toner was jammed, possibly because of the non use of the machine?

Sent from my SM-G780G using Tapatalk

[Jimdale]

Re: C75 error code 042 325

Our printer has been down for a year then we got it back up and have now been getting the Error 042-325

Tech not sure I've seen the yellow drum

but we've replaced that drum several times and still getting the same error

would it be the main motor drive

oh and another thing the tech found that the motor for the waste toner was jammed, possibly because of the non use of the machine?

Sent from my SM-G780G using Tapatalk

A bad belt edge sensor will cause that problem. I had a 250 that had that fault intermittently being caused by a bad bypass tray motor.