100% Red on DC 5000

[kalindd]

Hi there. I'm having some problems with printing 100% red on DC 5000. see the left image and the acceptable red on the right side. Right side image is from DC 5000 that had the same problem, 100% red, the inboard and outboard does not match and the inboard looks orange. After cleaning the ROS inside, mirrors and everything, it looks like this right sided image. But other DC 5000 after same cleaning is printing like the left image (ignore the lines and scratches). Does anyone had this issue? Now I'm starting to think that the second machine needs new ROS. Any ideas are very welcome.

[ktxerox]

100% red on

hi kalindd,
here it is kamran from pakistan. did you checked the single print or each color ? first check the single print or each color at 60% . i did not found your attahced samples if you can send me samples u can note my id. ktxerox@gmail.com . i,ll try to resolve your issue.

Hi there. I'm having some problems with printing 100% red on DC 5000. see the left image and the acceptable red on the right side. Right side image is from DC 5000 that had the same problem, 100% red, the inboard and outboard does not match and the inboard looks orange. After cleaning the ROS inside, mirrors and everything, it looks like this right sided image. But other DC 5000 after same cleaning is printing like the left image (ignore the lines and scratches). Does anyone had this issue? Now I'm starting to think that the second machine needs new ROS. Any ideas are very welcome.

[TechMate]

Go to maxsetup and use the colour balance adjustment feature for I/B and O/B

[kalindd]

In/out adjustment does nothing good. I've tried it and nothing good happens. Anyway yesterday I fixed it, it was caused by the ROS. New ROS fixes the issue. Thanks again.