Altalink B8055

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • big mike
    Trusted Tech

    100+ Posts
    • Sep 2012
    • 125

    Altalink B8055

    Setting registration for prints is good, on the glass is also good. When I use the doc feeder the lead edge is off. I ran DC608, 6 sheets SEF, exit, reboot, and it is still off by 1/5". I tried it several times, the 6 sheets, power off/on, still off.
    On older models you could set it using the NVM. Does anyone know these values?

    Any help is appreciated.

    Mike
  • adriansto
    Service Manager

    Site Contributor
    VIP Subscriber
    1,000+ Posts
    • Nov 2007
    • 2309

    #2
    Re: Altalink B8055

    Make adj5 as manual says and after that adj60 all steps in order.

    Comment

    Working...