Xerox 700 Toner Chip and drum

[Samxerox]

Hi its my first post here.
I have a Xerox 700 and we refill the toner cartridges. I was wondering is there a way of resetting the toner chips to read full again.
I know that if I run a few new toners with new chips the old revive a little.

So is there a nvm to reset the toner chips.

Also I rebuild my drums and wondered is there a nvm to reset them also.

Look forward to your responses.

Regards
Sam

[GIUBOSS]

Re: Xerox 700 Toner Chip and drum

try here , I found this but didn't investigate.

https://www.aliexpress.com/item/32470641291.html?spm=a2g0o.ppclist.product.42.78e7vpRkvpRkmQ&pdp_npi=2%40dis%21EUR%21%E2%82%AC+656.61%21%E2%82%AC+656.61%21%21%21%21%21%40211b801616814811296666090e6222%2156801002034%21btf&_t=pvid%3A6e97ed40-d42f-44d7-b07e-e9c125d1d574&afTraceInfo=32470641291__pc__pcBridgePPC__xxxxxx__1681481130&gatewayAdapt=glo2ita

[Samxerox]

Re: Xerox 700 Toner Chip and drum

Thanks for the reply and that item looks interesting.
But at the cost of it I can purchase I believe around 130 new toner chips.
So it is not cost affective for me.
I was hoping for a nvm code or other suggestions like an ardunio build that someone had already Done.
But it looks like no one is aware of such a thing.
But thank you for your suggestion