Print quality issue on DC5252

[davidj7]

The trailing edge is blurred in coated 280 gsm paper on DC5252. I have attached a sample print.It happens only in 12.6*19.2 size paper printing in full bleed and on coated 280 gsm, does not happen on coated 220 gsm or less. machine has done 11,00,000 new 2nd btr.

[Milo Wilson]

Try this

Modify NVM values of 2nd BTR transfer.
151-220 gsm coated, change:
746-856 nom.= 101,2nd BTR 151-220 Side 1 duplex, modify value to 80, or 70 (if needed)
746-862 nom.= 97, 2nd BTR 151-220 Side 2 duplex, modify value to 80, or 70 (if needed)


221-280 gsm coated, change:
746-857 nom.= 87, 2nd BTR, modify value to 70 or lower if needed (never go below 55)

[davidj7]

thanks milo , problem solved.the value was 78 i set it to 70