Workcentre Pro45 network controller problem

[xcopytech]

Only way which I know is with xerox pws and altboot software and firmware for wc 35/45/55 machines.

Tried a couple times to clone hdd but did not have success.

[tech9]

i have the software levels but you need a pws to load.

[ac3243]

Firmware levels

What firmware versions can you load with a PWS. Since I don't have the network controller working right now, it's a little hard to tell what version it was running when it quite. If I start with a new drive, what can versions can I load?

[xcopytech]

with altboot you can download any version

[Milo Wilson]

I would load 3.97.20.00 to start, then you can upgrade through the internet to 3.98.50