Background on DC2060

[costou]

Hello,

since yesterday, i have a yellow background in every prints.

it's just in the part superior of the print, i changed the yellow developer, just the developper NOT the assembly, and i changed the print cartridge to be sure, and it happen again. I don't know what to clean or change.
If anyone have an answer.....

Thank you

[jayc67]

Hello,

since yesterday, i have a yellow background in every prints.

it's just in the part superior of the print, i changed the yellow developer, just the developper NOT the assembly, and i changed the print cartridge to be sure, and it happen again. I don't know what to clean or change.
If anyone have an answer.....

Thank you

Can you scan a copy and send it on the forum?
Do you change the corontron?

Thanks

[costou]

ok I send a copy of a scan (in A4 not in A3) but i don't know if we can see the problem in the scan......
there is a background very clear in the part superior of the sheet. but just in the impresion area, not in all the sheet (without the mardge).

so....thanks

[costou]

and yes the corotron is changed cause I changed the print cartridge

[davidj7]

interchange 1st btr in the ibt assembly with another color since you have changed all the other things that could cause the problem. and could u scan another print with some image or which clearly shows the problem.


Have you cleaned the ROS for yellow

[costou]

here's other print.

we can see the difference between up and down, and the background yellow at the up of the sheet
and sorry my english.....

[davidj7]

more of yellow in the leading edge or inboard or outboard? (meaning which side came first)

[costou]

the sheet is come out exactly like that, when you are in front of the printer, the sheet is like the scan, so the yellow is in the up, so I think it's the inboard

[jayc67]

try to reset the NVM value

[davidj7]

did u try exchanging the 1st btr roller?

[costou]

hello,

I don't understand anything, but i interchanged between printcartridge yellow and magenta, and now, ther is no background.

i don't understand because at first, i had a background yellow so i changed the print cartridge with a new print for the yellow, and the background still printed. And when I interchanged with the magenta, ther is no problem......

if the problem comes again, i will say it to you.

Thank you all for your answers.

[davidj7]

now i am not able to figure out what happened...........well anyways machines working . good luck to you