dc 12 colour moves sometimes

[JimmyB]

Also wonder if its possible to update the driver in my Fiery. In the little frontpanel it says XP12 V1.1 sp2.

I have some newer drivers I downloaded from Internet but when when changing it from my deskpanel in windows it seems it only change the driver from my computer.
Heres ( http://www.femtanfiffig.com/xp12.jpg ) a configuration printout I just made. Its very possible haha that I have made som more bad settings in it since I have changed itr a lot and never had a pro from start to help me.
Will be more that happy as always for any help

you run on Fiery XP12 software ver1.1 sp2 and you can use only driver for that version.
probably you downloaded driver for ver2.0! you have to find Fiery software v2.0 and to install on rip, after that you can use driver ver2.0,
but ver2.0 (running on XP, not NT system) is upgrade kit and is difficulty to find ver2.0.

[Stroker]

There should be the error code on the bottom left of the screen on the printer, just a number with one digit followed by a dash and 3 digits.

Okey. Now it happened again. Error code 9 -345.
Suppose its something vith the IBT again or?

[GusG]

Okey. Now it happened again. Error code 9 -345.
Suppose its something vith the IBT again or?

Hi, it is:
9-345/9-435 IBT Cleaner Retract Fail RAP
The Control Logic has detected that the IBT Clean Blade failed to retract from the IBT.
It looks like you need a PWS to fix this, I don't know what else you can do but maybe someone else knows what to do.

[davidj7]

you dont need PWS to service DC12

[Stroker]

Okey. So I will take the IBT out again as I did last time some months ago when cleaning it with compressed air. Can I have som advice witch part it is that fail. It seems it happens when making a lot of copies at the same time. Happens only after 350-400 pages.. could it be the heat?? and do I have to get som new parts to fix it?

Btw- I found a torrent with PWS for diagnostic und service manuals/utilities for various Xerox copiers and it was working for my dc12 as well. Dont know if it works but I will try to download it anyway.

[bojans]

Btw- I found a torrent with PWS for diagnostic und service manuals/utilities for various Xerox copiers and it was working for my dc12 as well. Dont know if it works but I will try to download it anyway.[/QUOTE]

It works

[Stroker]

http://www.copytechnet.com/forums/xe...r-9-363-a.html ) and that seems to be too much for me to understand and wrenching without tools. When cleaning the IBT i drooped it a inch or two so a little plastic thing broke of sitting in lower end at front. Looks like a pointer or arrow and one inch long. moveable Cant figure out what its good for. Machine worked good when trying it out after but made some noice when carrying the paper. Dont know if that it has something to do with the latest 9-355 fault.