DC 250 Fuser problem - 077-909

[migdest]

Re: DC 250 Fuser problem - 077-909

Help Anyone with this problem? The fusor is new but still with the problem

[InterfaceP]

Re: DC 250 Fuser problem - 077-909

Help Anyone with this problem? The fusor is new but still with the problem

First off you should start you own thread and not one from 5 years ago.

Second did you read the responses? Did you try them?

Rant over... Remove the fuser and clean all the sensors with a clean rag or preferably compressed air. If this fails to work, take note of where the jam occurs and report back.

Good luck!